Kit Information

Colour Tubes Kit Information

Our simple to use vehicle touch up paint is available in four unique kits depending on the level of paint chip repair you’re wishing to achieve. Simply enter the make, model and year of your car via our vehicle search form to view the available colours, then select your desired touch up paint kit on the product page and proceed to checkout. We deliver Australia wide. Alternatively, you can search for your vehicle’s paint colour code via the form below. We’ve also put together this handy guide on where to find this code depending on your vehicle.


Professional Kit

$132.95

Best for: Maximum protection against deep chips, rust spots, bare metal, or plastic damage.

Get complete peace of mind and total repair capability for any chip or scratch on your vehicle. The Ultimate Kit provides max-volume color supply alongside 3 dedicated Gloss Clear and Direct-To-Metal Primer tubes, allowing you to properly prep exposed metal or plastic before painting and polishing for a flawless, long-lasting factory look.

What's inside:
3 x Pre-Treatment Wipes
3 x 3ml Colour Tubes
3 x 3ml Gloss Clear/DTM Primer
1 x Squeegee
3 x Microbrushes
30ml Mixing Cup
1 x 100ml Finishing Solution Bottle
3 x Wiping Cloths
1 Micro Fibre Cloth

Application Instructions
  1. Clean the area using the provided pre-treatment wipes and wipe dry.
  2. If you have bare metal or plastic you can use a very small amount of the Clear/DTM primer before applying the colour. Follow the colour instructions for use. Allow to dry before applying the colour.
  3. Cut the tip of the Colour Tube to your desired size. A smaller hole gives better control.
  4. Apply a small amount of paint onto the micro brush for door edges and bumpers or the squeegee for chips and scratches directly from the tube.
  5. Apply paint to the chip or scratch. Use the squeegee to spread evenly if needed. Keep in mind less is more. Use the minimum amount of paint possible to cover the damage, do not judge the colour while it is wet.
  6. Let the paint dry 10 minutes before applying the clear. The clear is milky when applied but dries clear. Use the same method as the colour, best applied with the squeegee.
  7. If layering is desired, wait at least 10 minutes between coats (1 hour is ideal for best results).
  8. Use a fan or hairdryer in case of high humidity or low airflow to assist drying.
  9. Once dry apply a liberal amount of finishing solution to the wiping cloth, keeping the cloth flat rub over the repair until the excess paint has been removed. When trying to level the repair flat, wrap the squeegee in the cleaning cloth to create a flat surface.
  10. Wipe dry and polish the surface with the microfibre towel.
  11. Avoid polishing or buffing the repaired area for at least 7 days.
  12. To reuse, clean the tube tip with a pre treatment wipe and reseal the tube using some masking tape or similar.

Advanced Kit

$104.95

Best for: The complete home repair: covering multiple chips, tricky curves, and high-shine polishing.

Our most popular choice for thorough DIY repairs across your whole vehicle. The Deluxe Kit includes extra paint capacity, specialized microbrushes for awkward spots like door edges or bumpers, and a full 100ml Finishing Solution with microfibre cloths to blend and polish for a smooth, high-quality result.

What's inside:
3 x Pre-Treatment Wipes
3 x 3ml Colour Tubes
1 x Squeegee
3 x Microbrushes
30ml Mixing Cup
1 x 100ml Finishing Solution Bottle
3 x Wiping Cloths
1 Micro Fibre Cloth

Application Instructions
  1. Clean the area using the provided pre-treatment wipes and wipe dry.
  2. Cut the tip of the Colour Tube to your desired size. A smaller hole gives better control.
  3. Apply a small amount of paint onto the micro brush for door edges and bumpers or the squeegee for chips and scratches directly from the tube.
  4. Apply paint to the chip or scratch. Use the squeegee to spread evenly if needed. Keep in mind less is more. Use the minimum amount of paint possible to cover the damage, do not judge the colour while it is wet.
  5. Let the paint dry fully. It will self-level and the colour may change as it cures. Do not judge the colour while it is wet.
  6. If layering is desired, wait at least 10 minutes between coats (1 hour is ideal for best results).
  7. Use a fan or hairdryer in case of high humidity or low airflow to assist drying.
  8. Once dry apply a liberal amount of finishing solution to the wiping cloth, keeping the cloth flat rub over the repair until the excess paint has been removed.
  9. Wipe dry and polish the surface with the microfibre towel.
  10. Avoid polishing or buffing the repaired area for at least 7 days.
  11. To reuse, clean the tube tip with a pre treatment wipe and reseal the tube using some masking tape or similar.

Essentials Kit

$74.95

Best for: Everyday stone chips that require extra depth and gloss protection.

Step up to the Simple Plus Clear Kit to ensure your repair sits level with surrounding factory paint. Including a clearcoat and primer solution, this kit builds up deeper chips layer-by-layer, sealing the color and adding extra gloss to match your vehicle's original finish.

What's inside:
2 x Pre-Treatment Wipes
2 x 3ml Colour Tubes
1 x Squeegee
2 x Finishing Solution Wipes
3 x Microbrushes
1 x 3ml Gloss Clear/DTM Primer

Application Instructions
  1. Clean the area using the provided pre-treatment wipes and wipe dry.
  2. If you have bare metal or plastic you can use a very small amount of the Clear/DTM primer before applying the colour. Follow the colour instructions for use. Allow to dry before applying the colour.
  3. Cut the tip of the Colour Tube to your desired size. A smaller hole gives better control.
  4. Apply a small amount of paint onto the micro brush for door edges and bumpers or the squeegee for chips and scratches directly from the tube.
  5. Apply paint to the chip or scratch. Use the squeegee to spread evenly if needed. Keep in mind less is more. Use the minimum amount of paint possible to cover the damage, do not judge the colour while it is wet.
  6. Let the paint dry 10 minutes before applying the clear. The clear is milky when applied but dries clear. Use the same method as the colour, best applied with the squeegee.
  7. If layering is desired, wait at least 10 minutes between coats (1 hour is ideal for best results).
  8. Use a fan or hairdryer in case of high humidity or low airflow to assist drying.
  9. Once fully dry, use the finishing solution wipes to clean any excess paint and clear from the surface.
  10. Avoid polishing or buffing the repaired area for at least 7 days.
  11. To reuse, clean the tube tip with a pre treatment wipe and reseal the tube using some masking tape or similar.

Starter Kit

$62.95

Best for: A basic touch-up on surface marks and minor chips.

Get a basic, tidy repair without messy paint buildup. This starter kit features a targeted squeegee for smooth application and specialized wipes to lift away excess paint. Ideal for simple, small jobs where you need a fast visual improvement.

What's inside:
2 x Pre-Treatment Wipes
2 x 3ml Colour Tubes
1 x Squeegee
2 x Finishing Solution Wipes
3 x Microbrushes

Application Instructions
  1. Clean the area using the provided pre-treatment wipes and wipe dry.
  2. Cut the tip of the Colour Tube to your desired size. A smaller hole gives better control.
  3. Apply a small amount of paint onto the micro brush for door edges and bumpers or the squeegee for chips and scratches directly from the tube.
  4. Apply paint to the chip or scratch. Use the squeegee to spread evenly if needed. Keep in mind less is more. Use the minimum amount of paint possible to cover the damage.
  5. Let the paint dry fully. It will self-level and the colour may change as it cures. Do not judge the colour while it is wet.
  6. If layering is needed, wait at least 10 minutes between coats (1 hour is ideal for best results). Keep in mind fill the chip level without clear is not possible.
  7. Use a fan or hairdryer in case of high humidity or low airflow to assist drying.
  8. Once fully dry, use the finishing solution wipes to clean any excess paint from the surface.
  9. Avoid polishing or buffing the repaired area for at least 7 days.
  10. To reuse, clean the tube tip with a pre treatment wipe and reseal the tube using some masking tape or similar.


Loading...